What usually goes wrong
Most sump pump failures come down to a handful of parts.
The float switch
The switch that turns the pump on can stick against the side of the pit, tangle in its cord or wear out. A stuck switch leaves the pump off while the pit fills, or on when it's empty.
The check valve
This one-way valve on the discharge pipe stops pumped water from falling back into the pit. When it fails, the pump re-pumps the same water and cycles on and off.
The motor
A motor that hums but doesn't pump, trips the breaker or overheats may be failing, especially after a long, hard-working season.
A clogged intake
Silt, gravel and debris in the pit can block the pump's intake screen and cut how much water it moves.
The discharge line
A frozen, crushed or disconnected discharge line outside sends water back toward the house or stops it leaving at all.
Power
A tripped breaker or GFCI outlet, or a pump unplugged during other basement work, is a common and easily missed cause.
What to check before you call
Make sure the pump is plugged in and that the outlet has power. Many sump pumps sit on a GFCI outlet, which can trip on its own; press its reset button. Check the breaker too. Stay out of standing water near outlets and cords.
If you can see the float, check that nothing is holding it down or pinning it to the side of the pit. If the pump still won't run, or it runs and the water level doesn't drop, call or text (224) 805-0861.
How a sump pump repair visit works
No surprises or upselling. Here is the order we work in.
-
Tell us what's happening
Call or text and describe it: not running, running nonstop, cycling or noisy, and whether water is rising. Louis texts customers back from the same number that's on the van.
-
We test the system
We check power, lift the float, watch the pump run, and inspect the check valve, the intake and the discharge line.
-
You approve the cost
We explain what's wrong and whether a repair or a new pump makes more sense. Customers know and approve the cost before work begins.
-
We fix it and run it
We make the repair, then fill the pit and watch the pump empty it and shut off before we leave.
Repair or a new pump?
A float switch, check valve or discharge problem is usually a repair. A worn-out motor, a pump that can't keep up with the water coming in, or a corroded older pump usually points to a replacement. We'll tell you which one you're looking at.
We offer 24/7 emergency service. If the pit is filling and the pump isn't running, call (224) 805-0861 any time, day or night. Comfort Air Control is a family business based in Northbrook, serving 28 North Shore and northwest-suburban towns.
Sump Pump Repair: common questions
Why does my sump pump turn on and off every few seconds?
Rapid cycling often points to a failed check valve letting water fall back into the pit, or a float switch set too tight. It wears the pump out quickly, so have it checked.
My sump pump hums but doesn't pump. What's wrong?
A humming pump that moves no water may be jammed with debris, have a blocked intake or a failing motor. Unplug it and call or text (224) 805-0861.
Can you come if my basement is flooding?
Yes. We offer 24/7 emergency service. Call (224) 805-0861 any time, day or night.
Will I know the cost before you start?
Yes. We explain what's wrong and what your options are first. Customers know and approve the cost before work begins.
Is there a diagnostic fee?
There's no set diagnostic fee. A diagnostic visit usually costs $129 to $159. Customers know and approve the cost of any repair before work begins.
Is there a labor warranty on repairs?
Yes. Our labor warranty is 1 year on repairs.