Common toilet problems
Most toilet calls trace back to a few parts inside the tank or under the base.
Constant running or random refills
The flapper at the bottom of the tank isn't sealing, or the fill valve isn't shutting off. Both waste water around the clock.
Slow or incomplete flush
A low water level in the tank, a partial clog, or mineral buildup in the rim holes under the bowl's edge.
Leaks at the floor
A failed wax ring under the toilet or loose closet bolts. Water on the floor can damage the subfloor and the ceiling below.
Leaks at the supply line
A worn supply hose or shutoff valve behind the toilet. These are inexpensive to replace and worth replacing before they burst.
A toilet that keeps clogging
Repeated clogs can point to an older low-flow design, a partial blockage further down the line, or something lodged in the trap.
Repair or a new toilet?
Most toilet problems are repairs. Flappers, fill valves, handles, supply lines and wax rings all wear out, and replacing them puts the toilet back in service.
A new toilet makes more sense when the bowl or tank is cracked, when it keeps needing repairs, or when you're tired of a model that clogs or flushes poorly. That's a good moment to choose a high-efficiency toilet, which uses less water per flush than many older ones. We remove the old toilet, set the new one on a fresh seal and check it for leaks.
Garbage disposal problems
Hums but won't spin
Something is jamming the grinding plate, or the motor is struggling. Turn it off at the switch and don't put your hand inside.
No sound at all
The disposal's own reset button may have tripped, or the outlet, switch or breaker has lost power.
Leaking under the sink
Leaks can come from the sink flange, the dishwasher connection, the drain pipe or the unit itself. Where it drips tells us which.
Slow draining or bad smells
Food buildup in the disposal or the drain line, or a partial clog further down.
Keeping a disposal working
Run cold water
Run it before, during and for a few seconds after grinding to carry waste down the drain.
Skip the hard stuff
Grease, fibrous peels, bones, coffee grounds and large amounts of starchy food are common causes of jams and clogs.
Use it regularly
Regular use helps keep parts moving and prevents rust and buildup.
How we work
When a disposal is leaking from its body or keeps jamming, replacement is often the better choice. We install new disposals and connect them to the sink, the drain and the dishwasher.
Call or text (224) 805-0861 and describe what's happening. Louis texts customers back from the same number that's on the van. We find the cause, explain whether it's a repair or a replacement, and customers know and approve the cost before work begins.
Comfort Air Control is a family business based in Northbrook, serving 28 North Shore and northwest-suburban towns. We offer 10% discounts for senior citizens, veterans and new customers; ask about the details when you call.
Toilets & Garbage Disposals: common questions
Why does my toilet keep running?
Usually the flapper isn't sealing or the fill valve isn't shutting off. Both are common wear parts and straightforward to replace.
Why is there water around the base of my toilet?
Often the wax ring under the toilet has failed or the toilet has worked loose. Have it fixed soon, because water under a toilet can damage the floor.
My garbage disposal hums but won't turn. What should I do?
Turn it off at the switch and keep your hand out of it. Something is usually jamming the grinding plate. Call or text (224) 805-0861 if you can't clear it safely.
Do you install high-efficiency toilets?
Yes. A high-efficiency toilet uses less water per flush than many older models, and replacing a worn-out toilet is a natural time to choose one.
Is there a labor warranty on installations?
Yes. Our labor warranty is 2 to 3 years on installations. Ask about the coverage for your job when you call (224) 805-0861.