Planning a ductless system
A good ductless installation starts with the rooms, not the equipment. We look at which spaces need heating, cooling or both, how big they are, how much glass they have, and how the people in them use them.
From there we work out how many indoor units the job needs, where each one should go so it can reach the whole room, and where the outdoor unit can sit with clear airflow and a sensible path for the lines.
Choices that shape the job
We'll go through each of these with you before anything is decided.
How many zones
One room or several. More indoor units mean more equipment and more work, but each room gets its own control.
Indoor unit style
High-wall units are the most common. Ceiling cassettes and floor consoles fit rooms where a wall unit won't.
Size for each room
Every indoor unit is matched to its room's load. Too big and it cycles on and off; too small and it can't keep up.
Line routing
The refrigerant lines, drain and wiring run outside the wall to the outdoor unit, usually covered by a tidy line-set cover.
Cold-weather heating
Most mini-splits heat as well as cool. If a room will rely on one in deep cold, the model's low-temperature performance matters.
Replacing an older mini-split
Repairs keep coming back
One fix after another on the same system is a sign it's wearing out.
It can't keep the room comfortable
When a unit runs constantly and the room still isn't right, it may be undersized or past its best.
A major part fails on an older unit
When a compressor or board fails on an aging system, that money often goes further toward new equipment.
It uses R-22
Older systems that use R-22 get harder and more costly to recharge after a leak, because R-22 is no longer produced.
How an installation works
-
We look at the space
We walk the rooms, check the walls and the outdoor location, and talk about how you want each space to feel.
-
We explain your options
You hear what we'd recommend, how many zones and which styles, and why. Customers know and approve the cost before work begins.
-
We install it
We mount the indoor units, set the outdoor unit, run and connect the lines, drain and wiring, and seal the wall openings.
-
We start it and show you
We run each zone in cooling and heating, check it's working as it should and show you the remote and the filters.
Three ways to save
Comfort Air Control offers 10% discounts for senior citizens, veterans and new customers. Ask about the details when you call (224) 805-0861.
We're a family business based in Northbrook, and we install and replace ductless systems across 28 North Shore and northwest-suburban towns.
Ductless Installation & Replacement: common questions
How many indoor units do I need?
It depends on the rooms. An open space may need one; separate rooms usually each need their own. We look at the layout and recommend the fewest units that will keep every space comfortable.
Where does the outdoor unit go?
Usually on a pad or bracket near an outside wall, with clear space for airflow and a short, tidy path for the lines. We'll show you the options before we start.
Can I add a mini-split to a home that has central air?
Yes. A mini-split often handles a room the central system doesn't reach well, such as an addition, a sunroom or a finished attic.
Do you replace older ductless systems?
Yes. When an older system no longer makes sense to repair, we replace it, and we'll explain why first.
Is there a labor warranty on installations?
Yes. Our labor warranty is 2 to 3 years on installations. Ask about the coverage for your job when you call (224) 805-0861.