When it's time for a new pump
The pump can't keep up
If the water level keeps rising during heavy rain while the pump runs, it may be too small for the water coming in.
The motor is failing
A pump that overheats, trips the breaker or hums without moving water is often at the end of its working life.
Repairs keep coming back
Repeated switch and valve repairs on an older pump are a sign the whole unit is wearing out.
Rust and wear
Heavy corrosion on the pump or its fittings means it's aging, and it's better replaced on your schedule than during a storm.
A basement without one
If water is coming in where there's no pit or pump, we'll look at the situation and explain what installing one would involve.
What goes into choosing a pump
We'll explain each of these before anything is decided.
Submersible or pedestal
A submersible pump sits in the pit, under the water, and runs quieter. A pedestal pump's motor sits above the pit, out of the water.
Capacity
The pump has to move the water your pit takes in, lifted to the height of the discharge pipe. That's why we look at how your pit fills before choosing a size.
The switch
Float switches come in different styles. The right one depends on the size and shape of the pit.
Check valve and discharge
A new pump is a good time to replace the check valve and look at where the discharge line ends outside.
A battery backup
A backup pump in the same pit keeps working if the power goes out or the main pump fails.
Where the water goes matters
A pump is only as good as the line that carries the water away. If the discharge pipe ends right next to the foundation, the water can soak back down and return to the pit. If the outside end freezes or gets crushed, the pump can't empty the pit at all. We look at the whole route when we put in a new pump.
How an installation works
-
We look at the pit and the basement
We check the pit, how water comes in, the power supply and where the discharge line runs.
-
We explain your options
You hear which pump we'd recommend, whether a backup makes sense for your home, and why. Customers know and approve the cost before work begins.
-
We install it
We remove the old pump, set the new one, connect the check valve and discharge pipe, and position the switch.
-
We test it
We fill the pit, watch the pump start, empty it and shut off, and check that water leaves the line outside.
Three ways to save
Comfort Air Control offers 10% discounts for senior citizens, veterans and new customers. Ask about the details when you call (224) 805-0861.
We're a family business based in Northbrook, and we install and replace sump pumps across 28 North Shore and northwest-suburban towns.
Sump Pump Installation & Replacement: common questions
What size sump pump do I need?
It depends on how much water your pit takes in and how high the pump has to push it to the discharge pipe. We look at both before recommending a pump.
Should I replace my sump pump before it fails?
If it's showing signs of wear, yes. Replacing a tired pump on your schedule beats finding out it's failed during a storm.
Can you add a battery backup when you install a new pump?
Yes. We install battery backup sump pumps, and a new pump is a natural time to add one.
Do you install sump pumps in basements that don't have one?
We'll look at where the water is coming in and explain what installing a pit and pump would involve for your basement.
Is there a labor warranty on installations?
Yes. Our labor warranty is 2 to 3 years on installations. Ask about the coverage for your job when you call (224) 805-0861.