Why sump pumps need testing
A sump pump can sit idle for weeks, then have to run for hours. Parts that haven't moved in a while can stick, and nobody notices until the pit is full. Testing makes the pump do its job on a calm day, when a problem is easy to fix.
A battery backup needs the same attention. Its battery loses capacity over time, and a backup with a weak battery won't run long when the power goes out.
What a sump pump check covers
A typical maintenance visit includes these checks.
Run test
We fill the pit to lift the float and confirm the pump starts, empties the pit and stops.
Float switch
We check that the switch moves freely and isn't catching on the pit wall or the cord.
Check valve
We confirm water isn't falling back into the pit after the pump shuts off.
Pit and intake
We clear silt and debris from the pit and the pump's intake screen.
Discharge line
We check that water leaves the pipe outside and drains away from the house, and that the line isn't blocked or damaged.
Battery backup
We test the backup pump, its switch and alarm, and the battery's condition.
When to schedule
Early spring, before the snowmelt and the spring rains, is the most useful time. A check in fall before the ground freezes is worth it too if your pump works hard. Schedule one any time the pump has sat unused through a long dry spell.
A quick test you can do yourself
-
Find the pump
Locate the pit and make sure the pump is plugged in and the outlet has power.
-
Add water
Slowly pour a bucket of water into the pit until the float rises.
-
Watch and listen
The pump should start, lower the water and shut off without grinding or rattling.
-
Check outside
Look at the end of the discharge line to make sure water is coming out and running away from the house.
After a big storm
A long, heavy rain is the hardest work a sump pump does. Afterward, take a look: is the pit back to its normal level, did the pump shut off on its own, and is anything new in the pit, like gravel or silt washed in? If the backup ran, its alarm may have sounded and its battery will need time to recharge.
If the pump ran far longer than usual, struggled to keep up or made new noises, have it checked before the next storm rather than after.
If a test turns up a problem
We explain what we found and what your options are. Customers know and approve the cost before work begins.
Comfort Air Control is a family business based in Northbrook. We maintain and test sump pumps and battery backups across 28 North Shore and northwest-suburban towns. Call or text (224) 805-0861.
Sump Pump Maintenance & Testing: common questions
How often should a sump pump be tested?
At least once a year, ideally in early spring before heavy rain. A quick bucket test of your own every few months is a good habit too.
Do you test battery backups?
Yes. We test the backup pump, its switch and alarm, and the battery as part of sump pump maintenance.
Why should I clean the sump pit?
Silt and debris settle in the pit and can block the pump's intake or jam the float. Clearing them keeps the pump moving water freely.
What if the test shows a problem?
We explain what we found and your options before any work. Many issues, like a sticking float or a failed check valve, are straightforward repairs.