Common mini-split problems
These are the calls we get most about ductless systems, and what usually sits behind them.
The room won't reach the setting
Clogged indoor filters are the first thing to rule out. After that, a dirty coil, a refrigerant leak or a failing outdoor fan can all cut the system's output.
Water running down the wall
Each indoor unit drains the moisture it pulls from the air. When the drain line or pan clogs, the water has nowhere to go but out of the unit and down the wall.
An error code or blinking light
Mini-splits report their own faults. Write down the code or the blink pattern, and the brand and model from the label, before you call. It helps narrow things down.
The indoor unit won't respond
Try fresh batteries in the remote first. If the unit still ignores it, the receiver, the control board or the power supply may be the problem.
A stale or musty smell
Dust and moisture collect on the indoor coil and the blower wheel inside the unit. A deep cleaning usually clears it.
Ice or frost that stays
In heating mode the outdoor unit defrosts itself. Ice that keeps building on it, or frost on the indoor coil in cooling mode, needs a look.
Before you call
Pull out the indoor unit's filters and look at them. They slide out from under the front cover on most wall units, and they can clog faster than people expect. Rinse them, let them dry fully, and put them back.
Make sure the remote is set to the mode you want, cool or heat rather than fan or dry, and that the batteries are good. Check the breaker for the outdoor unit. If the system still isn't working, call or text and tell us what you're seeing and any code on the display.
How a ductless repair visit works
No surprises or upselling. Here is the order we work in.
-
Tell us what it's doing
Call or text (224) 805-0861 with the symptom, the room and any error code. Louis texts customers back from the same number that's on the van.
-
We trace the cause
We check the indoor unit, the drain, the line set, the outdoor unit and the controls, and read the system's fault codes.
-
You approve the cost
We explain what's wrong and what your options are. Customers know and approve the cost before work begins.
-
We fix it and test it
We make the repair, then run the system and check the room is heating or cooling again before we leave.
When only one room has a problem
On a multi-zone system, one indoor unit can act up while the others run fine. That usually points to something at that unit: its filter, its drain, its fan or its sensor.
When every room is affected at once, the problem is more likely shared: the outdoor unit, the refrigerant charge or the power supply. Telling us which rooms are affected helps us bring the right parts.
Repair first, then options
Most ductless problems are repairable, and we would rather fix what can be fixed. If a system is past the point where a repair makes sense, we'll tell you plainly and explain what a replacement would involve.
We offer 24/7 emergency service. Comfort Air Control is a family business based in Northbrook, and we repair ductless systems of all makes and models in 28 North Shore and northwest-suburban towns.
Ductless Mini-Split Repair: common questions
Why is water dripping from my mini-split?
Usually the condensate drain line or pan is clogged, so the water the unit pulls from the air backs up and spills out. Turn the unit off and call or text (224) 805-0861.
What does the blinking light on my mini-split mean?
Most mini-splits flash a code when they detect a fault. The meaning depends on the brand and model. Note the pattern and the model number from the label, and tell us when you call.
Do you repair mini-splits someone else installed?
Yes. We work on all makes and models, whoever installed them.
Will I know the cost before you start?
Yes. We explain what's wrong and what your options are first. Customers know and approve the cost before work begins.
Is there a diagnostic fee?
There's no set diagnostic fee. A diagnostic visit usually costs $129 to $159. Customers know and approve the cost of any repair before work begins.
Is there a labor warranty on repairs?
Yes. Our labor warranty is 1 year on repairs.