What your filter actually does
The filter in your furnace or air handler has two jobs. It keeps dust and debris off the blower and the indoor coil, so the equipment runs as designed, and it catches particles before they're blown back into the house.
A clogged filter does the opposite. It chokes the airflow, makes the blower work harder, can freeze an air conditioner's coil in summer and overheat a furnace in winter. Many no-heat and no-cooling calls start with a filter that's been in too long.
Picking the right filter
MERV ratings
MERV rates how small a particle a filter can catch. Higher numbers catch finer particles.
Denser isn't always better
A filter that's too restrictive for your system can cut airflow. The right filter balances capture with the airflow your equipment needs.
Thin filters and media cabinets
One-inch filters fit most standard slots. Thicker media filters sit in a cabinet beside the furnace and usually last longer between changes.
Getting the size right
The size is printed on the edge of the filter. A filter that doesn't fit snugly lets air bypass it.
How often to change it
Look at it once a month when the heat or air conditioning is running a lot, and swap it out when it looks gray or packed with dust. One-inch filters fill up faster than the thick media kind. Pets, construction dust and a busy household all shorten the time between changes. If you can't remember the last change, it's probably due.
Where to find your filter
Most homes have the filter in a slot on the furnace or air handler, where the return duct meets the cabinet, or in a separate media cabinet beside it. Some homes also have filters behind return grilles in the walls or ceiling. Note the size and the direction arrow on the frame before you take it out, so the new one goes back the same way.
Ventilation for tight homes
Newer and well-sealed homes keep heat in and drafts out, which is good for comfort and energy use. It also means cooking smells, moisture and stale air have fewer ways out.
A ventilation system brings in a measured amount of fresh outdoor air and sends stale air outside, with fans and ducts sized for the house. Some types recover heat or moisture from the outgoing air, so the fresh air needs less heating or cooling. We'll look at your home and explain what fits.
Signs your home needs more fresh air
Stuffy rooms
Air that feels close, especially in bedrooms overnight.
Lingering smells
Cooking and other odors that hang around long after they should be gone.
Window condensation
Heavy moisture on the inside of windows in winter.
A recent tightening
New windows, insulation or air sealing can change how a house breathes.
How we can help
We replace filters and install and service ventilation systems. Customers know and approve the cost before work begins. Comfort Air Control is a family business based in Northbrook, serving 28 North Shore and northwest-suburban towns. Call or text (224) 805-0861.
Air Filters & Ventilation: common questions
What MERV rating should I use?
It depends on your system. A higher MERV catches finer particles, but a filter that's too dense can restrict airflow. We'll match a filter to your equipment.
Can a dirty filter cause my furnace or AC to stop working?
Yes. A clogged filter cuts airflow, which can freeze an air conditioner's coil or make a furnace overheat and shut itself off.
Do you replace air filters?
Yes. We offer air filter replacement and can help you pick the right type for your system.
What is a ventilation system?
It brings measured fresh outdoor air into the house and sends stale air out, so a well-sealed home doesn't trap moisture and odors.